congatec GmbH

Formfactor 3.5" Carrier Board Board Variant PN 020750 conga-SMC1/SMARC-ARM for ARM based SMARC 2.0 Modules Internal Connectors and Features

1x LVDS 18/24bit single/dual channel LVDS

2x optional eDP/DSI(dependent on processor platform)

1x LCD backlight (5V and 12V)

1x SATA Gen3(support of SATADOM VCC PIN 7 and PIN 8)

1x SATA Power (+5V, +12V)

1x mPCIefull/half size (support for PCIe Gen3 and USB 2.0)

1x M.2 Type E 2230 (I2S, PCIe Gen3, USB 2.0)

1x M.2 Type B 2242/2280 (2x PCIe Gen 3, USB 2.0)

2x MIPI-CSI

1x Micro SIM (muxedbetween M.2 Type B and mini PCIe)

2x RS 232/422/485 (COM 0 and COM 2 with handshake)

2x RS232 (COM 1 and COM3 TX/RX only)

2x CAN

1x Micro SD card

1x GPIO connector (up to 8 GPIO)

1x Feature connector(Batlow, Charging, GbESDP, WD)

1x Buttons and LEDs (Power, Reset, Sleep, LID, Power LED, SATA LED)

1x Onboard power button

1x Onboard power state LED

1x SPI/eSPIheader

1x I2C header

1x DMIC and analog front panel audio output

1x 12V FAN connector (4-pin)

1x RTC backup(CR2032)

1x Internal DC-IN External Connectors 2x GbERJ45

2x USB 2.0

1x USB 2.0 OTG

2x USB 3.0/3.1

1x HDMI

1x DP++

1x Audio Jack 4-pin with I2S audio WM8904

1x External DC-In (12-24V) Power Specification External and internal DC-In (12-24V Wide Range Carrier Board Supply ) Operating Temperature Operating Temp.: 0°C … +60°C

Storage Temp.: -20°C … +70°C Humidity Operating Hum.:10% -90% r. H. non cond.

Storage Hum.: 5% -95% r. H. non cond. Size 146 x 102 mm (approx. 5.75" x 4.02")